Electric two-way valve

Product Details

The electric two-way valve consists of a driver and a valve. The driver is driven by a synchronous motor and has spring reset and manual valve opening lever control functions. The magnetic force generated by the motor rotor and clutch in the drive can generate stable torque in the event of a pause. Therefore, when there is no current passing through the drive, it can stably stop at any point. When the valve is fully open or closed, the magnetic clutch disengages and stops adjusting. The signal sent by the controller of the driver can rotate the motor clockwise or counterclockwise.

Key features:

OLED display screen, no dead corners, high brightness;
32-bit high-performance CPU with an accuracy of+1.0%/0.5%;
Brushless motor, stable and reliable, with long service life;
Optional high-speed 6S/1S;
Optional built-in power-off reset, fault alarm, LED indicator light;
Equal percentage, linear, fast opening flow characteristics.

Basic performance parameters of electric two-way valve
Model		BH100T
Size（mm)		15/20/25
Body material		SUS304/SUS316
Seat sealing ring		PTFE
Connection method		Thread/Butt welding
Thread type		G/NPT
Fluid temp. range		0~100℃
Max. working pressure		1.6Mpa
Rated voltage		AV220V、AC/DC24V、DC24V、DC12V
Control method		Default 4-20mA
Power off reset		KT power-off reset function
Rated torque		15N·m
Operating time		Approximately 10sec./6sec.
Insulation resistance		100MQ/500VDC
Voltage withstand level		1500VAC@1min.
Rotation		90±2°
Max. rotation angle		360°
Manual operation		A hexaongal wrench for use when power is off
Operating mode		S3-75%(AC),S3-85%(DC)
Noise level		Max.75dB(A)
Position indication		Mechanical indicator+OLED
Protection grade		IP67
Ambient temp.		-15℃<t<45℃ (Other ambient temperatures can be customized)
Installation method		The actuator should not be facing vertically downwards, and attention should be paid to reserving space for manual operation or wiring
Maintenance		Maintenance free

Size	d	L1=L2		G1	D1	L		H1	H2	H	F	W(Kg)
Size	d	Thread	Butt welding	Thread	Butt welding	Thread	Butt welding	H1	H2	H	F	W(Kg)
DN15	15	20	20	G1/2"	22.5	72	63	22.5	42.0	147.5	26	1.2
DN20	20	20	23	G3/4”	27.5	80	78	22.5	48.0	153.5	32	1.4
DN25	25	20	24	G1”	34.0	85	87	30.0	55.0	168.0	40	1.7

ꄴPrevious： null

ꄲNext： null

Product Classification

ꂃ ꁹ